Table of Contents
Advertisement
MAINTENANCE
MAINTENANCE
FILL IN DATES
AS YOU COMPLETE
REGULAR
SERVICE
1 Check for Loose Fasteners
R
Clean / Inspect Snow Thrower
O
W
Check/Replace
V-Belts
_
Lubrication
Chart
v'
v'
i/
v'
Check Engine Oil Level
E
N
Change
Engine Oil
Inspect Muffler
N
Check/Replace
Spark Plug
E
Empty Fuel Tank
v'
v'
GENERAL
RECOMMENDATIONS
The warranty on this snow thrower does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
snow thrower as instructed in this manual. Some adjust-
ments will need to be made periodically to properly maintain
your snow thrower.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
•
Once a year, you should replace the spark plug and
check belts for wear. A new spark plug will help your
engine run better and last longer.
•
Follow the maintenance schedule in this manual.
NOTE: Use only Original Equipment Manufacturer (OEM)
parts to service this unit. Failure to do so can cause the unit
to malfunction and pose a risk of injury to the operator.
BEFORE
EACH USE
1.
Check engine oil level.
2.
Check for loose fasteners.
3.
Check controlsto be sure they are functioning properly.
LUBRICATION
CHART
(_ SAE 30 Motor Oil
(_ See "ENGINE"
in
Maintenance section
O Pivot points
Engine oil
LUBRICATION
Keep your snow thrower well lubricated (See "LUBRI-
CATION CHART").
SNOW THROWER
Always observe the safety rules when performing
any
maintenance.
TIRES
•
Maintain proper air pressure in both tires (See "PROD-
UCT SPECIFICATIONS"
section in this manual).
14
•
Keep tires free of gasoline and oil, which can harm
rubber.
NOTE: To seal tire punctures and prevent flat tires due to
slow leaks, tire sealant may be purchased from your local
parts dealer. Tire sealant also prevents tire dry rot and
corrosion.
Advertisement
Table of Contents
