Poulan Pro PP325 Instruction Manual page 13

Hide thumbs Also See for PP325:
Table of Contents

Advertisement

Available languages

Available languages

be picked up by the air intake and thrown out
through
discharge
opening, damaging
unit,
property,
or
causing
serious
injury
to
bystanders
or operator.
• Never place objects inside the blower tubes,
vacuum tubes or blower outlet. Always direct
the
biowing
debris
away
from
people,
animals,
glass,
and solid objects
such as
trees, automobiles, wails, etc. The force of air
can cause rocks, dirt, or sticks to be thrown or
to ricochet which can hurt people or animals,
break glass, or cause other damage.
• Never
run
unit
without
the
proper
equipment
attached.
When using your unit
as a blower, always install blower tubes.
• Check air intake opening,
blower
tubes or
vacuum
tubes
frequently,
always
with
engine
stopped
and
spark
plug
disconnected.
Keep vents and discharge
tubes free of debris which can accumulate
and restrict proper air flow.
• Never place any object in air intake opening
as this could restrict proper airflow and cause
damage to the unit.
• Never use for spreading chemicals, fertilizers,
or other substances
which may contain toxic
materiaIs.
• To avoid spreading fire, do not use near leaf or
brush
fires,
fireplaces,
barbecue
pits,
ashtrays, etc.
CULTIVATOR
SAFETY
WARNING:
Rotating tines can cause
serious injury.
Keep away from rotating tines.
Stop the engine and disconnect
the spark plug
before unclogging tines or making repairs.
.-&
41WARNING:
Inspect
the area to be
cultivated
before starting the unit. Removeall
debris
and hard and sharp
objects
such as
rocks, vines,
branches,
rope, string, etc.
• Avoid heavy contact with solid objects that
might stop the tines. If heavy contact occurs,
stop the
engine and inspect
the
unit for
damage.
• Never operate the cultivator without the fine
cover in place and properly secured.
• Keep the tines and guard clear of debris.
• After
striking
a foreign
object,
stop the
engine,
disconnect
the
spark
plug
and
inspect the cultivator
for damage.
Repair
before restarting.
• Disconnect
attachment
from the drive engine
before cleaning the tines with a hose and
water to remove any build-up.
Oil the tines to
prevent rust.
• Always
wear
gloves
when
servicing
or
cleaning
the fines. The fines
become very
sharp from use.
• Do
not
run
unit
at high
speed
unless
cultivating.
HEDGE
TRIMMER
SAFETY
,_DANGER:
RISK
OF
CUq_ KEEP
HANDS AWAY FROM BLADE - Blade moves
momentarily after the trigger is released.
Do not
attempt to clear away cut material when the
blade is in motion. Make sure the switch is in the
OFF position, the spark
plug wire is discon-
nected, and the blade has stopped moving be-
fore removing jammed material from the cutting
blade. Do not grab or hold the unit by the cutting
blade.
Blades move
momentarily
after the
dtrigger is
Allow blades to stop
before removing
them from the cut.
A
WARNING:
Inspect
the area before
starting
the unit. Remove
all debris and hard
objects
such as rocks, glass, wire,
etc. that
can ricochet,
be thrown,
or otherwise
cause
injury or damage
during
operation.
• Do
not use
a cutting
blade
that is bent,
warped, cracked, broken or damaged
in any
other way.
Have worn or damaged
parts
replaced by an authorized service dealer.
• Always
keep
unit
in front of your
body.
Keep all parts of your body away from the
cutting
blade.
• Keep the cutting blade and air vents clear of
debris.
POLE
PRUNER
SAFETY
WARNING:
The
reciprocating blade/
rotating
chain
can cause
severe
injury.
In-
spect the unit before use. Do not operate
unit
with a bent, cracked or dull blade or dull chain.
Keep away from the blade/chain.
_, WARNING:
The
reciprocating blade/
rotating chain is sharp.
Do not touch.
To pre-
vent serious
injury, always
stop engine and
ensure blade/chain
has stopped
moving, dis-
connect
spark
plug, and wear gloves when
changing
or handling
the blade or chain.
,_WARNING:
A coasting
blade/rotat-
ing chain can cause injury while it continues
to
move
after the engine is stopped.
Maintain
proper control of the unit until the blade/chain
has
completely
stopped
moving.
Keep
hands,
face and feet at a distance
from all
moving parts.
Do not attempt to touch or stop
the blade or chain when it is moving.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents