Fisher & Paykel Refrigerator & Freezer User Manual page 10

Door Conversion
Fit new cap door closing to bottom hinge bracket. The new
cap door closing is a mirror image of the existing part.
Remove the hinge hole covers from the ends of the door
using a narrow blade to prise them away from the door. The
hinge hole covers are the components without holes. Keep
them for re-use.
Move the hinge bearing on the door to the opposite side of
the top of the door (refer Figure 3).
Fit the new hinge bearing closing hook to the opposite side
of the bottom door. The new hinge bearing hook is a mirror
image of the existing part.
Remove the old hinge bearing closing hook from the door
(refer Figure 4).
Replace the door. Replace the top hinge bracket and secure
with the top hinge bracket screws making sure that the door
is square.
Hinge Cover
Hinge Bearing
Closing Hook
10
Top Hinge
Bracket
Bottom Hinge
Bolt
Figure 3
Figure 4
Hinge Bearing
Cap Door Closing
Hinge Hole
Cover
Bottom Hinge
Bracket