Operation; Product View And Parts Identification; Choke Control; Primer - Craftsman 247.9854 Operator's Manual

Recoil
Gas Ca
AugerControl
Electric
Button
Outlet
Control
ChuteAssembl'
ShavePlate
Au(
Nowthat youhaveset up yoursnowthrower,it's importantto become
acquainted with its controlsand features.Referto Figure9.
CHOKE CONTROL
CHOK£ B£ W
Handle
Figure9
RECOUL STARTER HANDLE
The recoilstarterhandleis usedto startthe engine.
GAS CAP
Removethe gascap to add fuel
KEY
The key is a safetydevice,it mustbe fully insertedin
order for theengine to starL Removethe key whenthe
snow throweris not in use.
Activatingthe chokecontrolclosesthe chokeplateon carburetorand
aids in startin_ diengine The chokeleverslidesbetweenthe RUN I _ 1
and CHOKE l'rl positions.
Pressingthe primer,makingsureto coverthe
vent hob when pushing,forcesfueldirectlyinto
theengine'scarburetorto aid in cold-weatherstarting.
NOTE: Do notturn the key in an attemptto startthe 0
engine.Doingso maycause it to break.
AUGER
Whenengaged,the augerrotationdrawssnow intothe augerhousing
and throwsit out the dischargechute.Rubberpaddieson the auger
also aid in propellingthe snowthroweras they comein contactwith
the pavemenL
Meets ANSi Safety Standards
CraftsmanSnowThrowersconformto the safetystandardof the AmericanNationalStandardsinstitute(ANSi).
10