Makita JR3030T Instruction Manual page 4

Specific Safety Rules
1. Hold tool by insulated gdpping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with
a "live" wire will also make exposed metal parts of the tool "live" and shock
the operator.
2. Avoid cutting nails. Inspect workplace for any nails and remove them before
operation.
3. Do not cut oversize workpiece.
4. Check for the proper clearance beyond the workpiece before cutting so that
the blade will not strike the floor, workbench, etc.
5, Hold the tool firmly.
6, Make sure the blade is not contacting the workplace before the switch is
turned on.
7. Keep hands away from moving parts.
8. Do not leave the tool running. Operate the tool only when hand-held.
9. Always switch off and wait for the blade to come to a complete stop before
removing the blade from the workpiece,
10. Do not touch the blade or the workpiece immediately after operation; they
may be extremely hot and could burn your skin,
SAVE THESE INSTRUCTIONS.
4