Advertisement
our IV calt automatically _et
tself for local area (or Cable
TV) channels. This makes it easy
for you to select only the TV
stations in your area when the
CH(annel) • • buttons are
pressed.
NOTE: lf you went through Setup
(in your Quick Use Guide), this
task has already been completed
for you.
'_
Press MENU • or • on the
TV (or on the remote press M
button and then M &V buttons.)
Select the word PROGRAM with
the TV's on-screen Arrow.
<_
Press the (+)
(on
button
the
I TV or the remote)
to PROGRAM.
<_
Press the (+) button
again
to
start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
at any time. When the channel
search is completed the TV will
return to the last viewed channel.
Press STATUS button to clear
the screen
and see which channels have been
added.
Remember, if you want to drop
any unwanted channels from the
TV's memory, see the next page
on how to "Manually" add and
delete channels.
Note: As the TV searches for
channels to "ADD" into memory
the on-screen display may move
(or jitter slightly). This is normal
operation and does not indicate a
need for service.
I
added to the
_GRAMMINGIN PROCESS
!
The TV screen will be blocked off
I
I
until the search for channels is
done.
6
Advertisement
