Real-Time Counter Memory - Philips CCB134AT Owner's Manual

42 Real.Time Counter M emory
• °.° ° • ,°°° °°°°.°°.° .°° °°°°° °°°,° °°° °° °° °° °°°° •°°° °°° °°
Follow the steps below to reset the real-time counter to zero at a i _i
tape location you want to refer to later.
I :}
9
I
Play, fast fonvard, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
s_
01:08PM
C__O
3
12345
While the counter remains on the screen, press the
CLEAR button to reset the real-time counter to zero.
f
\
00000 I
4
While the counter remains on the screen, press the MEM-
ORY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen,
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/_l button or the
F.FWD/I_ button when playback is stopped.When the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/A button to
watch the tape.
J
Ii Helpful Hints
The real-time counter memory will
not function during Repent Play
mode. Details are on page 43.
You may only set one real-time
counter memory at a time. If you
set the real-time counter to zero at
a second location, the previous real-
time counter to zero setting will be
lost.