Advertisement
\
"
::: :
i ¸ :i:
.i ;i
.....
B_.:_ ....
:_: + _?::
_::"
IE# e
25
See the aboveinformationon
how |o usethe LocatorCode
ButtonforProgramming.
For most homes this step would
not be needed but for your
information:
Up to 9 different remote locator
address codes can be set on which the
TV can send out its "homing" signal.
This is done in case there is more than
one TV (with a remote locator)
present, and you want only one
specific remote to be signaled when the
73/is turned ON.*
To set a Locator Address Code:
>With
TV turned ON, press the
LOCATOR
CODE button on the
remote. (Also be sure the TV
SYSTEM button on the remote has
been pressed.)
You will need a pencil or pen to press
the recessed button.
The TV shows the present Remote
Locator Code.
<_
Press any
(0-9) on
number button
the remote to set or change the Locator
Code.
The remote will beep to let you know
it has received the new Locator Code
and then return to its normal operating
mode.
I_
_
Remember. If batteries are
placed the Locator Code will
Ineed to be reentered.
When setting the Locator Code if any
button, other than the number buttons,
are pressed the remote will return to its
normal operation mode.
*For owners who live in an apartment
(townhouse or condominium)
complex, this task may be necessary
since the remote Iocator's signal can be
sent and detected direcly fhrough
adjoining walls.
Advertisement
