Advertisement
hen using the TV remote
with a VCR, first make
certain it is set to control your
VCR ( by the REMOTE CODE or
SEARCH method - see following
section).
_
Press theVCR System
button on the remote.
_
Point the top of the remote
toward the front of the VCR
(remote sensor window) when
pressing buttons.
Record
Button
Hold the RECORD button down, and
then press the PLAY button to begin
a VCR recording.
Rewind Button
Press to rewind tapes. For some
VCRs you may need to press STOP
button first then REWIND. In
playback mode. hold button down to
view picture moving rapidly in
reverse.
Pause Button
Press to temporarily stop the tape dur-
ing a playback or recording. Press
again to release Pause.
TV-V(_R
Button
Press to the VCR position ("VCR"
indicator on the VileRwill light) to
view the playback of a tape. Press
again to place in the TV position
("VCR" iqdicator on the VCR will go
OFF) to view one program while
recording another program.
PLAYI
STATUS
PAUSE II
(ON/OFEX POS]( SWAP _ FREEZE)
PIP
(P/VUEX STRB X
SIZE )
•Play Button
Press to playback a tape. Hold down
after pressing the RECORD button to
start a recording.
Press to stop the tape.
-Fast Forward
Button
Press to rapidly advance the tape. For
some VCRs you may need to press
STOP first then FF. In Playback
mode hold button down to view the
picture moving rapidly in the forward
direction.
.Channel
Scan Buttons
Press to scan up or down through
VCR channel numbers.
Number Buttons
Press buttons for direct VCR channel
selections.
VCR System Button
Press to send remote commands to
the VCR.
Power Button
Press to turn the VCR ON and OFF.
I
_u
Remember.
The VCR
ttons on the remote
will
not operate your VCR if those
features
are not already
found on
your VCR remote control.
Note: All VCR functions
(particularly Search, Rewind, Fast
Forward, etc.) will operate the
same as with the original VCR
-
remote control provided with the
VCR.
23
Advertisement
