Philips DVDR80 Owner's Manual page 76

5
To start recording, press REC/OTR • on the remote control
or RECORD on the DVD Recorder.
To start the recording after all other recordings on the disc,
press and hold the REC/OTR • button until '5_FE REE' appears
in the display.
For DVD+Rs, each recording is always started after all previous
recordings since previous recordings cannot be overwritten.
The display panel will appear similar to the example shown
below.
Inserting chapter markers
During recording, scenes can be marked so they can be found or hidden
later.
During recording, press FSS _< at the start of the desired location.
'Inserting marke/; appears on the TV screen, In the display, the
number of 'CHAPTERS' is increased by one.
For more information about title/chapter, please read the section
'Changing to a different chapter track!title' in the chapter 'Other
playback functions'.
Tip
I_1_1 I 1"
IIIIIIIIIIIIIIIIIIIII
6
You can stop recording by pressing STOP • on the remote or
• on the recorder. '_IE_4b' UP_T' will appear on the display. The
DVD Recorder is preparing the list of contents. Wait until this
message disappears in the display, then the recording is
completed
Ix If display reads '_I S[ E_ _' 1
¢" The recording could not be completed correctly because of a disc
Problem
I error, Check and clean the inserted disc if necessary,
I Making recordings on DVD+R discs compatible
If you want to playback recordings on a DVD player, you must first
finalize the disc in the DVD Recorder, You can use the 'Finalizing'
unction on the DVD so that it can be read by the DVD player without
, . . + • T
problem. Please read paragraph Fmahzmg DVD R discs _n the chapter
Tip
'Managing disc content',
Recording 65