Playing A Dvd+Rw Or Dvd+R; Playing Audio Cds - Philips DVDR80 Owner's Manual

Playing a DVD+RW or DVD+R
1
2
3
4
5
[f the inserted disc has been write-protected or it is a finalized
DVD+R, playback starts automatically.
If playback does not start automatically, select the title you want
to play from the index screen using CH- • or • CH+.
You can also use the 1_14 or I1_1_ buttons on the front of the
recorder
Press the PLAYI_ button.
The following will appear on the display:
title/chapter number, elapsed time.
xl see the message E,FP,_,_L on the display
¢_ There are no recordings on this disc.
To stop playback, press STOP • on the remote control or
• on the DVD Recorder
To eject the disc, press OPEN/CLOSE-_& on the front of the
DVD Recorder.
What do I must pay attention to with regard to recordings that
have been recorded in different recording modes?
During playback, the device will automatically switch to the proper mode
'M1, M2, M2x, M3, M4. M6, M8',
For more information, please read the section 'Selecting the recording
mode (quality)' in the chapter 'Manual recording _.
Playing audio CDs
Problem 1
!
f-t-'l// F_I_II_IF_ PI_I 1
I_1_1 I
I
IIIIIIIIIIIIIIIIIIIII
You can also use the DVD Recorder to play audio CDs
1
2
Insert an audio CD Playback starts automatically
Audio CO display
If the TV is turned on, the Audio CD display will appear on the screen,
During playback, the number of the current track wilI be shown on the
screen and display.
Tip
Stop playback with STOP
•
. Track number and total play time
are displayed.
48 Playback