Satellite Receiver - Philips DVDR3355 User Manual

Optional Connections (continued)
Antenna/cable TV
signals
Back of aVCR (Example only)
Back of a Cable Box
or Satellite Receiver
(E_mple only)
Connecting to aVCR and
Cable Box/Satellite Receiver
A splitter (not supplied) is required for
this connection.
O Connect the Antenna/Cable TV signal to a
splitter: Then connect the RF coaxial
cables fi'om the splitter to the antenna
input (RF IN) jack on theVCR and the
Cable Box/Satellite Receiver,
Use an RF coaxial cable to connect the
antenna output (RF OUT) jack on the
VCR to the antenna input jack on theTV,
Use the supplied RF coaxial cable to
connect the antenna output (RF OUT)
jack on the Cable Box/Satellite Receiver
to the ANTENNA _" jack on the DVD
recorder,
@
@
Use the audio/video cables to connect
VIDEO/AUDIO IN-EXT on the DVD
recorder to the matchingVIDEO/AUDIO
output
jacks on theVCR.
Use the audio/video cables to connect
VIDEO/AUDIO OUT-2 on the DVD
recorder to the matchingVIDEO/AUDIO
input jacks on the TV,
Helpful Hints:
- You may use the S-VIDEO (Y/C) jack
instead of VIDEO (CVgS) jack if the
connected device has the same S-VIDEO
input/output jack. This video connection
provides better picture qualit_
TIPS: Before making or changing any €0nnecti0ns, make sure that a!! the devices are disconnected from
the power outlet.
18