Advertisement
ou need to make sure
that the TV is set to pick
up either Cable
TV stations
or Antenna
signals.
In other
words, the TV needs to know
whether you have connected
a Cable TV signal
or a nor-
mal antenna
to its ANTENNA
plug (see page 2).
NOTE:
If you went through
First Time Setup (page 3),
this task has already
been
completed
for you.
Press MENU • or •
on the TV (or on the remote
press M button and then M
• • buttons.)
Select the word CABLE with
the TV's on-screen Arrow.
Press the (+) or (-) but-
tons (on the TV or the remote)
to select either:
YES-
If you DO have Cable
TV connected to the
TV. Channels 1-125
can be selected.
NO-
If you have an Antenna
connected to the TV.
Channels 2-69 Can be
selected.
PressSTATUS
button
1
the remote control to clear t
|
screen.
/
Try it out.
Press the CHAN-
NEL A•
buttons
and scan the chan-
nels. CH••
works
only after STATUS
button is pressed to
clear the screen (or
Menu times out -
about 1 minute.)
Remember,
to set
the TV to select the
channels on your
Cable system, or in
your area, see the
"Autoprogram" and
"Adding Channels "
in the section
below.
uto-Progl
am is jor
adding
local area chan-
nel numbers
into the memory
of the TE. This makes it easy
for you to select only your
area (or Cable system)
chan-
nels when the CHANNEL
• • buttons
are pressed.
NOTE:
If you went through
First Time Setup (page 3),
this task has already
been
completed
for you.
Press MENU • or •
on the TV (or on the remote
9ress M button and then M
&• buttons.)
_elect the word PROGRAM
with the TV's on-screen Arrow.
,<_P--r_ess the (+) butt°p(R°g
I <
the TV or the remote) to
- I
GRAM.
I
_Press
the (+) button agahl
to start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as
the TV looks for channels to
"ADD".
_You
may press any button
(on the TV or remote) to stop
the channel search at any time.
When the channel search is
completed the TV will return to
the last viewed channel.
The TV screen will be blocked
off until the search for channels
is done.
"RED"
channel numbers
have been
added to the TV's memory.
"WHITE"
channel numbers
are not
the TV's program memory.
tESS€ TO
CHANNELS
_Try
it out. Press I
L ••
buttons I
which channels
I
I
havebeen added.
To drop any unwanted channels
from the TV's memory, see
how to "Manually" delete
channels in the section below.
When searching for channels the
TV screen display may jitter
slightly. This is normal
and does
not indicate a need for service.
uto-Program
(see above)
adds all the channels
it
can find (on your Antenna
or
Cable TV system)
into the
TV's memory.
Add/Delete
channels
makes it easy for
you to add other channels,
or
drop unwanted
channels,
from
the list of channels
in
the TV's memory.
Press MENU • or •
on the TV (or on the remote
press M button and then M
• • buttons.)
Select the word CHANNEL
with the TV's on-screen Arrow.
<
_2'_ Pr--'_-_ss
Channel Number
buttons on the remote (or
CHANNEL ••
buttons on the
TV) to select the channel you
want to SAVE (or DELETE.)
_Press
(+) button to SAVE [_
Press the STATUS butlion
the selected channel number
]
[to clear the screen after add" g
into memory.
I I(or
d eleting) all the channels
Press (-) button to DELETE
aI [you
want.
channel from memory.
J
Try it out. Press
The channels you SAVED
To SAVE a channel above 100,
NNELA,,or
•
should appear. The channels
use the CH••
buttons on the
l- (( r_))_ buttons and "scan
from
vou DELETED should not
TV. The remote number buttons
/"_!
channel
to channel,
appear,
only go up to channel 99.
4
Advertisement
