Advertisement
Vour
Cable "IV input
I
into your home may be
a single (75 ohm) cable, or
a Converter
Box installa-
tion. In either case the
connection
to the TV is
very easy, Just put the
threaded
end of the cab&
signal to the TV's antenna
plug and screw it down
tight.
If your Cable TV sig-
nal is a single round cable (75
ohm) then you're ready to con-
nect to the TV.
If you have a Cable TV
Converter Box:
Connect the Cable TV signal to
the Cable Signal IN(put) plug
on the Converter.
2__
the Cable TV
cable to the ANTENNA/CABLE
plug on the TV.
If you have a Cable TV
Converter
Box:
Connect the OUT(put) plug
from the Converter to the
ANTENNA/CABLE
plug on the
TV.
Cable TV Company
Box Connection
75[2 Ohm
NOTE: The connecting
cable for
the Converter is supplied from
1
the Cable TU Company.
Back
of TV
Renlclllber,
[[
set the TV for the
type signal you've
just connected (see
page 3 of this Set-
Up Guide.)
To select only the
channel numbers on
your Cable system
see "Auto Program"
(page 3). If you use
a Cable Converter
box, set the TV to
the same channel as
the converter's CH
3/4 switch (on the
rear of the convert-
er.)
normal
broadcast
channels
(VHF
2-13 and UHF 14-69).
Your connection
is easy
since there is only one
75_
(ohm) antenna plug
on the back of your TV -
and that's where the anten-
na goes.
your antenna has a
round cable (75 ohm) on the
end, then you're ready to con-
nect it to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter.
T
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
_Push
the round end of the
adapter (or antenna) onto the
ANTENNA/CABLE
plug on
the rear of the TV. If the round
end of the antenna wire is
threaded, screw it down tight.
300 to 75[2
Adapter
483521827003)
Twin Lea{
Wire
Round Cable
75ft
otwmeof you may ha ve
o separate
antennas.
One antenna
is for VHF
channels
(2-13) and the
other antenna
is for UHF
channels
(14-69).
For homes with separate
UHF/VHF
antennas,
you
will need an optional
"combiner"
before you can
connect to the TV. See the
"Smart Help" section
(to
the right on this page) for
ordering
details.
--_AAttach
the separate
UHF and VHF antennas to
the correct screws on the com-
biner.
Outdoor UHF Antenna
(Twin-lead 300 Ohm)
Outdoor VHF Antenna
(Twin-lead 300 Ohm)
Outdoor VI--IF Antenna
(Round 75 Ohm cable)
<_Push
the round end of the combiner
[onto the ANTENNA/CABLE
plug on
]
[the rear of the TV.
U/V Combiner
75-300 Ohm Adapter
Back of TV
Back of TV
Round Cable 75f2
Remcmber,
!
be sure to set the
TV for the type sig-
nal you've connect-
ed (see page 3 of
this Set-Up Guide.)
To set the TV to
select only the
channel numbers in
your area see how
to "'Program"or
"Add" channels in
memory on page 3.
To order any
optional accessory
contact your dealer
or call the toll-free
accessory ordering
number (1-800-292-
6066):
• UHF/VHF
Combiner:
(SBV1133AO1)
• 75-300 Ohm
Adapter:
(SBV I 113AO 1)
• 300-75 Ohm
Adapter:
(483521827003)
_Ca e basic Antenna,
or
ble TV, to VCR to
TV connection
is shown to
the right. For more infor-
mation on other hookups
(possible
when Cable
ConverterlDescrambler
boxes are included)
refer
to your accessory
VCR
and Cable Converter
Owner's Manual for
details.
Connect your
Antenna or Cable TV signal
to the IN FROM ANT(enna)
plug on the VCR.
_Connect
the OUT TO TV
plug on the VCR to the
ANTENNA plug on the TV
(connecting cable supplied
with the VCR.)
<
_Refer
to the Owner's
Manual included with your
VCR for other possible con-
nections and TV/VCR operat-
ing details.
®
\
Round Cable
75£Z Supplied with VCR
2
VCR
Back of TV
Advertisement
