Before Using The Tv/Vcr - Philips CCB252AT Owner's Manual

Putting Batteries in the Remote Control
I
Remove the battery compartment lid on the bottom of
the remote control by sliding it in the direction of the
arrow.
2
Place two AA batteries inside the battery compartment
with their + and - ends aligned as indicated.
3
Replace the battery compartment lid.
3
Recording Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
I
To prevent accidental recording, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Remote Control
• Point the remote control at the TV/VCR's remote sensor.
• Do not put objectsbetween the remote control and the
TVNCR.
I
2
TV/VCR Maintenance
• In thisTVNCR, use only tapes with the _ mark.
• Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TVNCR.
Removable labels like these can jam the TVNCR.
• Periodic maintenance is required to maintain yourTVNCR's
excellent performance.This TVNCR has an automatic head
cleaning system. However, the video heads will eventually require
cleaningor replacement. Only an authorized service center
should perform this service.
_elpfu! H:mts
The remote control and its batteries
are supplied.
Do not mix alkaline and man-
ganese batteries.
Do not mix old and new batteries.