No Power
•
Check
the TV power cord.
Unplug
the TV, wait t 0 seconds,
then reinsert
the plug into the outlet and push
the POWER
button
again.
•
Check
that the outlet is not on a wall switch.
•
Be sure the fuse is nm blown
on the AC power
strip, if one is being used.
No Picture
• Check antenna connections.
Are they properly secured to the TV's ANT
75_ plug?
• Check the TUNER MODE control tbr the correct tuner setting.
• Try running the Auto Program feature m find all available channels.
• Press the AV button on the remote to make sure the correct signal source is
selected (FRONT or Current Channel).
No Sound
•
Check
the VOLUME
buttons.
•
Check
the MUTE button
on the remote
control.
•
If you're
atrempting
to hook up auxiliary
equipment,
check
the audio jack
connections
located
(m the fr(mt of the TV.
Remote Does Not Work
• Check the batteries.
Ifnecessar):
replace them with AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
• (:lean the remote control and the remote control sens(xr window (m the TV.
• Check the TV power cord. Unplug the T\q wait 10 seconds, then reinsert
the plug into the outlet and push the POWER button again.
• Be sure the fuse is nm blown on the AC power strip, if (me is being used.
• Check to be sure the TV outlet is not on a wall switch.
TV Displays Wrong Channel or No Channds Above 13
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL EDIT control) into
the TV's memory.
• Check m be sure the TUNER MODES arc set m the (:ABLE option and run
the Aura Program feature to find all available channels.