Lcn - Logical Channel Number; Channel Scan Or Store Type; Channel Skip; Channel Swap - Philips 7428 Series User Manual

5.6. Analog Manual Scan
Analog TV channels can be manually installed.
To install analog channels manually:
1 - Press Settings > Channels & Inputs > Channels >
Analog and press OK.
2 - Select Analog Manual Scan and press OK.
5.7. LCN - Logical Channel
Number
To switch on/off the LCN:
1 - Press Settings > Channels & Inputs > Channels >
Antenna and press OK.
2 - Select LCN and press OK.
3 - Select On or Off and press OK.
4 - Press Back, repeatedly if necessary, to close the menu.
5.8. Channel Scan or Store
Type
You can set the channel type for scanned or stored.
To set the channel scan type:
1 - Press Settings > Channels & Inputs > Channels >
Antenna and press OK.
2 - Select Channel Scan Type and press OK.
3 - Select the scan type you want and press OK.
4 - Press Back, repeatedly if necessary, to close the menu.
To set the channel store type:
1 - Press Settings > Channels & Inputs > Channels >
Antenna and press OK.
2 - Select Channel Store Type and press OK.
3 - Select the store type you want and press OK.
4 - Press Back, repeatedly if necessary, to close the menu.

5.9. Channel Skip

You can skip the channels you do not want to watch.
To set the skipped channels:
1 - While watching TV, press MENU > Navigation
Keys up > Channels > Channel Management and
press OK.
2 - Select Channel Skip and press OK.
3 - Select the channels you want to skip and press OK.
The check mark is shown.
4 - Press Back, repeatedly if necessary, to close the menu.

5.10. Channel Swap

You can swap the position on the channel list for each
channel.
To set the skipped channels:
1 - While watching TV, press MENU > Navigation
Keys up > Channels > Channel Management and
press OK.
2 - Select Channel Swap* and press OK.
3 - Press OK to select a channel, and then press
Navigation keys up or down to select another channel.
The position of first selected channel and the second
selected channel will be swapped to each other.
4 - Press Back, repeatedly if necessary, to close the menu.
* Note: Depending on your installation country or
operator setting, Channel Swap option is not always
available.

5.11. Channel Move

You can change the channels order as you like.
To move channels:
1 - While watching TV, press MENU > Navigation
Keys up > Channels > Channel Management and
press OK.
2 - Select Channel Move and press OK.
3 - Follow the on-screen description to select.
4 - Press Back, repeatedly if necessary, to close the menu.

5.12. Channel Edit

You can edit the channels from the channel list.
To edit the channels:
1 - While watching TV, press MENU > Navigation
Keys up > Channels > Channel Management and
press OK.
2 - Select Channel Edit and press OK.
3 - Use the Navigation keys to select the channel and
press Yellow key for Select.
13