With A Laserdisc Player - Sears 274.43968590 SERIES Owner's Manual

Using Your TV and Remote
With a Laserdisc Player: Programming and Basic Operation
Refer to your Laserdisc Player owner's manual to hook up your Laserdisc Player.
The remote may need to be programmed for your laserdisc player, but may
not operate all models of the brands listed below. Use the codes below or on the
sheet packed in with your remote.
Program the remote for
your Laserdisc Player
Basic Operation
Laserdisc Player Codes
J ioneer ........................33
ProScan .......................33
REW
REC
VCR1 SATeCABLE TV
VCR2°LD AUDIo
GO
PLAY FF
STOP PAUSE
DISPLAY SKIP
MUT[ CHA'_ PREV CH
INPUTo 00 ANTENNAo
CLEAR ,,,3 • ,_^ RESET
q MOVE J_
_7
A. Point the remote at the laserdisc
player and hold VGR2./D.
B. Enter the code for your brand
from the code list below.
C. Release VCR2 • LD.
D. Press POWER. If nothing
happens, try pressing
VCR2•LD and then POWER.
A. Tune TV to channel 00, 03,
or 04.
B. Point the remote at the laserdisc
player and press VCR2 °LD.
C. Press POWER to turn it on.
D. Use the buttons on the remote
that relate to laserdisc player
functions. Not all buttons
highlighted may work with
your laserdisc player.
E. Press POWER to turn it off.
14