With A Cable Box - Sears 274.43968590 SERIES Owner's Manual

Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
The Cable Channel works with DSS.CABLE button on the remote. If the
Cable Channel is set, pressing DSS, GABLE selects the channel to see
cable channels. The Cable Channel setting depends on which channel
your cable box must be on to see cable channels. The channels usually
used are 02, 03, 04, 05 or 06. Consult your cable company for more information.
1.
Select the Setup menu
13
Controls Alarm Ad
A. Press TV to set the remote to
control the TV.
B. Press MENU.PROG to select the
Setup menu. This menu is
white.
2.
Highlight Cable Channel
Controls Alarm Ad
13
A. Press MOVE • to move down
the menu until Cable Channel is
highlighted.
B. Press MOVE I_ to underline the
item.
3. Enter channel number
Enter the number for your cable
box, either 02, 03, 04, 05, or 06.
Press MOVE • or • until
"Disabled" is displayed to turn
this feature off.
13