Sanyo PLC-XP57L Owner's Manual page 28

COMPUTER INPUT
Reset
To reset the adjusted parameters, select Reset and press the
SELECT button. A confirmation box appears. Select [Yes]. All
the adjustments return to their previous figures.
Mode free
To clear adjusted parameters previously set, move the red frame
pointer to the Mode free icon and then press the SELECT
button. Move the red arrow pointer to a Mode that you want to
clear and then press the SELECT button.
Store
To store the adjusted parameters, move the red frame pointer to
the Store icon and then press the SELECT button. Move the red
arrow pointer to any of the Mode 1 to 10 in which you want to
store the parameters and then press the SELECT button.
Quit
Exit the PC ADJUST Menu.
28
To store adjustment data.
This Mode has parameters being stored.
Vacant
Shows the values of "Total
dots," "Position H," "Position V,"
"Display area H," and "Display
area V."
To clear adjustment data.
Close this dialog box.
A confirmation box appears
and then select [Yes].
Close this dialog box.
A confirmation box appears
and then select [Yes].