Switching Source Signals; Adjusting The Volume - HANNspree ST08-10A1 User Manual

Switching Source Signals

Press
SOURCE
source signals.
CH, AV1, and AV2 appear on the
top right corner of the screen in that
order.
Note
The TV supports S-Video input in addi-
tion to normal video and audio sig-
nals. The TV detects the signal type
automatically and gives priority to S-
video when two signals are detected at
the same time.

Adjusting the Volume

1
Press the volume up button to
increase the volume.
2
Press the volume down button to
decrease the volume.
3
Press MUTE. The word "MUTE"
appears on the top right corner of
the screen and sound is turned
off.
4
Press MUTE again to restore the
original volume.
to select different
CH 33
VOL CH MENU
SOURCE
Source
MUTE
MENU
VOL CH
SOURCE
Volume up
Volume down
29