Light Bulb Replacement - GE SpacemakerXL JVM1640 Owner's Manual

Light Bulb
Replacement
I To replace the bulb(s),
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2 Remove the screw at the
fi-ont of the light cover
and lower tim coven
3 Be sure the bulb(s) to be
replaced are cool befbre
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
Replace with the same size
and type bulb.
4 Raise the light shield
and replace the screw.
Connect electrical power
to the oven.
I To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2 Remove the top grille by
taking out the 2 screws
that hold it in place.
3 Remove the charcoal
filter (if present) to
access the light cover
(see Remove Charcoal
Filter section).
4 Remove the light cover
located near the center
of the oven that holds
the bulb. Remove the
bulb by gently turning.
Replace with the same
size and type bulb.
5 Replace the light cover
and charcoal filter
(if present).
8 Replace the grille and
screws. Connect electrical
power to the oven.