GE AHH24DQH1 Owner's Manual And Installation Instructions page 10

Installation Instructions
FI PREPARE THE CASE
D
NOTE:Attach curtains to the air conditioner
before placing the air conditioner in window.
Install the top mounting rail with four type A
screws.
D
D
Slide left-hand curtain assembly into left end
of top and bottom mounting rail. Repeat for
right-hand curtain assembly.
Fasten curtain retainer strips to the sides of the
outer case with three type A screws on each
side.
A. Top mounting rail C. 13132" screws
B. 13132" screws D. Side curtains
FI PREPARE WINDOW FOR INSTALLATION
D Measure the width of the window opening.
r_ Mark the center line on the inside windowsill.
B
A. Width of window opening
B. Center line
INSTALL OUTER CASE IN WINDOW
D
Place outer case in window. Lower sash until it
rests behind front flange of top mounting rail.
Bottom mounting rail must rest behind window
sill.
Top rail
o
Bottom rail
So
D
D
Expand the curtain panels to fill the window.
Secure with type C wood screw in top corners.
If needed, use drill and 1/8" bit to drill pilot holes
for the screws.
Use three type C screws to secure the top
mounting rail to the window. Drill pilot holes if
necessary.
10