GE JBP23 Owner's Manual page 17

ge.com
o
UseIF
leo 0
®
FstorQ
L°°)
How to Delay the Start of Cleaning (on some models)
Make suIe the clock shows the correct The display will show the start time. It
time of day: will not be possible to unlatch tile oven
door until tile temperature drops below
V-_ I,atch tile dooi. tile lock temperature.
[_ Touch tile
Self Clean
pad. Tile oven shuts off" autonlafically when
[_ Using tile 4- or - pads, enter tile tile self-cleaning cycle is complete, and
desired clean time. 0:00 will flash in tile display:
[_ Touch tile Start Time pad. Tile
earliest smit time you can set will
appeal in the display.
[_ Using tile 4- or - pads, enter
tile time of day you want tile
self-cleaning cycle to start.
[_] Touch
tile Start/On pad.
ToStop a Clean Cycle
Touch tile Clear/Offpad.
Wait until tile oven has cooled below file
locking temperature m unlatch tile dooL
You will not be able m open the door
fight away unless the oven has cooled
below the locking mmpemmre.
After a Clean Cycle
You may notice some white ash in tile
oven. Wipe it up with a (hmp cloth after
tile oven cools.
If whitespotsremain, r emove themwith a
soap-filled scouring padandrinsethoroughly
with a vinegar a ndwatermixture.
These deposits are usually a s_dt
residue that cannot be removed by
tile self-cleaning cycle.
If tile oven is not clean after one
self-cleaning cycle, repeat tile cycle.
You cannot set tile oven for cooking
until tile oven is cool enough for tile
door to be unlatched.
{{{iiiiiiili
{{{iiiiiiili
While tile oven is self-cleaning, you
call much
tile Clock pad m display
tile time of day: To return to tile
clean countdown, touch
file Cookillg
Time pad.
Apply a smaU amount of vegetable oil
m a paper towel and wipe die edges of
tile oven shekes with tile paper towel.
Do not spI W with Pare _ or other
lubricant sprays.
77