GE Appliances G153 Owner's Manual page 52

About the control panel-for models with STARTbutton.
• Add fabric softener Ion
models with a fabric softener
dispenser); see page 6 for
details
• Add detergent. GE
recommends the use of High
Efficiency _ detergents in
all Energy Star-rated washers
Step
• Add items
• Close lid
NOTE:Washer will not start
to fill with lid open on Auto
Load sensing settings Ion some
models}
Step 4
7
• Select load size and
other wash options,
including Fabric
Softener option
• Select wash cycle
• Select OPTIONS
• Push START
Quick Start Guide
LOAD SIZE
OR SIGNAL
TEMPERATURE OPTIONS
0 0 0 0 0
FILL SOAK WASH RINSE SPIN
Controls
START
0
STOP/PAUSE
El II
AUTOMATICLOAD
SENSINGequipped
models
Load Size(on somemodels)
• Add _ detergent to the bottom of the basket and fabric softener to the dispenser prior to loading clothes,
• Loosely load items in the washer basket, Overloading may negatively impact wash performance,
Adjust the load size accordingly,
• Makethe load selection:
For AUTOMATICLOAD SENSINGequipped models
- For convenience, best performance and optimal efficiency, select AUTOMATICLOAD SENSING,This selection
automatically provides the correct amount of water suited to the size and type of load placed in the unit,
- If you prefer to manually select the water level,select SMALLthrough SUPER, W hile AUTOMATICLOAD SENSINGis
best for most loads and general washing, you may want to manually select the load size for specialty items such
as bulky, lightweight comforters or pillows,where you want to ensure a larger water level is applied, Manual load
sizeselections should be made for wet items placed inthe washer, such as soaked towels or garments,
- The washer will not fill with water when automatic load sensing is selected if the lid is opened,
When the lid is closed the machine is able to begin filling with water in order to sense the load size,
NOTE:This is a high-efficiency washing machine, This system requires lesswater while providing effective cleaning
action, You may notice that the water level is lower than on your previous washer, This is normal,
or
Signal (on some modeN
• Select for an end of cycle signal,