Network - Panasonic Diga DMR-XW390 Operating Instructions Manual

Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.
HDMI Audio Output
Select "Off" when connected to a TV with an
HDMI cable, and connected to an
amplifier/receiver not compatible with HDMI
with a DIGITAL AUDIO OUT terminal.
Contents Type Flag
If "Automatic" is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select "Off" when you do not want to use
"HDAVI Control".

Network

Network Easy Settings
Press [OK] to start Network Easy Settings.
( 18)
Network Settings
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
• Press [OK] to show the respective setting.
• If you set "IP Address", "Subnet Mask" and
"Gateway Address" individually, make their
settings after setting "IP Address Auto-
assignment" to "Off".
When the router's DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the "IP
Address" and assign the same number for
"Subnet Mask" and "Gateway Address".
Proxy Server Settings
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
Internet Content Settings
Lock
You can restrict using VIERA CAST.
• PIN is required to change. (
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using VIERA
CAST.
• Depending on contents, this function will
not work.
• Select "Off" when the audio is warped.
Convenient functions
67)
75
VQT4C72