Panasonic Diga DMR-XW390 Operating Instructions Manual page 73

Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- The signals have a sampling frequency
of over 96 kHz.
- The disc has copy protection.
Dolby Digital/Dolby Digital Plus
DTS
MPEG
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio Type for XP Recording
Choose the audio type when recording or
copying with XP mode.
• The picture quality of LPCM recordings may be
lower than that of normal XP mode recordings.
• The audio recording becomes Dolby
even if you selected LPCM when using a
recording mode other than XP.
Audio Type for Digital Broadcast
If the programme has more than one track
(Dolby Digital, HE-AAC, etc.), you can set
®
priorities.
• This setting will give effect in the following
conditions.
- The default setting when watching
broadcasts.
- The default setting when playing back the title
recorded in DR mode.
- DR File Conversion (
- Normal speed copy from the title recorded in
DR mode. ( 40)
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio,
priority is given to what you select.
• This setting will give effect in DR File
Conversion ( 38)
Convenient functions
Digital
®
38)
73
VQT4C72