Advertisement
PARTS DRAWING / DESSIN DES PIÈCES / ESQUEMA DE LA PIEZAS
STATIONARY - Vertical models with B4900 pump
2
UNLOADER VALVE DETAIL
Description des pièces de la
soupape de purge
Detalle de la válvula de purga
CAUTION: To prevent damage to tank and
compressor, the tank must be shimmed so the
pump base is level within 1/8" per lineal foot
maximum to distribute oil properly. Fasten to floor
and NEVER force tank feet to floor without shims
when tightening. We also recommend the use of
vibration pads (094-0021) under tank feet.
22A
200-2405
Advertisement
