Connecting The Dvr - First Alert HS-4700-S User Manual

Setting Up Your System
Model HS-4700-S User's Manual
C
ONNECTING THE
1
Connect the mouse to the PS2 port on the DVR prior to plugging in DVR power
supply.
2
Connect the cable of the power supply adapter to the DC 12V connector on the DVR.
3
Plug the power supply into an electrical outlet. The DVR automatically powers on
when plugged in.
to computer
USB port
4
(optional) Attach a ground wire from the GND connector on the DVR to an
appropriate ground (e.g., mounting screw on the receptacle cover plate).
5
Press the LCD Power button on the front of the DVR to turn on display. This button
only controls the display, not the DVR unit.
The POWER indicator light on the front panel will light. When system initialization (boot up)
is complete, the image from each active camera will display on the quad-screen monitor. The
RUN indicator will flash when the system is operating in normal mode.
Note: Be sure to connect all components to the monitor prior to plugging in unit.
6
(optional) The DVR can be connected to an external display (i.e. television or
computer monitor) to view live video feed via the Video Out connection. Though the
DVR screen is programmed to shut off after 30 minutes to protect the display from
overheating, the video feed will continue without interruption if connected to an
external display.
DVR
to mouse
9
to electrical
power receptacle