Microdia MMCplus Operating Manual

MMCplus

OPERATING MANUAL

SPECIFICATIONS

Dimension:
Weight:
Operating Voltage:
Operating Temperature:
Clock Frequency:
Operating Humidity:
NOTE: Specifications are subject to change without notice.
REMOVAL of the MMCplus
1. Hold a corner of the blister.
2. Clap the blister on your palm for removing the
plastic case.
3. Hold the blister upside down with about an inch
of distance between the blister and the table.
4. Use your finger to push the edge of the
MMCplus card.
TM
5. Then MMCplus card will drop on the table.
TM
REMOVAL AND STORAGE OF THE MMCplus
1. Hold the case with both hands when opening and closing.
2. Unlock and open the lid of the case.
3. Store or remove the MMCplus
card is placed properly on the tray before closing the case.
4. Lock the plastic case.

PRECAUTIONS FOR HANDLING AND STORAGE

• Keep out of the reach of children. Get medical advice immediately if swallowed.
• Do not touch the interface pin directly by hands, metal or hard objects.
• Do not modify or disassemble the MMCplus
• Do not wet, heat/fire, impact, drop or bend the MMCplus
• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near
fire, a stove, an air-conditioner outlet, etc.
• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause
damage through melting or the emission of heat/smoke or cause product failure.
• Do not place in cooking appliances such as microwave ovens or high-pressure containers.
• Do not detach the label on the MMCplus

DATA PROTECTION

TM
• MICRODIA MMCplus
MMCplus card before formatting.
TM
• Do not remove the MMCplus
written and transferred. It can cause data to be destroyed.
• Insert the MMCplus
TM
inserted in an incorrect orientation or not inserted all the way
• Parental Guidance is needed when a child uses the MMCplus
product and insure that the child follows your instructions.
TM
MEMORY CARD
32 (L) x 24 (W) x 1.4 (T) mm
Approx. 2g
2.7V to 3.6V
-25°C to +85°C
Minimum 2.4 MB/sec
5% to 96% RH
TM
CARD from BLISTER
TM
card in the tray. Ensure the
TM
card.
TM
TM card. Do not attach other stickers/labels on the MMCplus
Memory Card comes pre-formatted. Make sure to back up all the data on your
TM card and switch off any equipment using the card when data is being read,
card firmly in the correct orientation.
CONFIRMATION OF PARTS LIST
MMCplus
Step 1 & 2
CARD IN PLASTIC CASE
card.
TM
The product will not operate correctly if it is
card. Teach the child how to use and protect the
TM
TM memory card Plastic Case
Step 3 & 4
Step 2
TM card.
Email: info@microdia.com
Website: http://www.microdia.com
Manual
Step 5
Step 3
MICRODIA Ltd