Mazda CX-7 Maintenance And Care page 64

CX-7_8CG3-EA-11J_Edition1 Page456
Saturday, September 24 2011 10:34 AM
Maintenance and Care
Appearance Care
NOTE
Because genuine leather is a natural
l
material, its surface is not uniform and it
may have natural scars, scratches, and
wrinkles.
To maintain the quality for as long as
l
possible, periodical maintenance, about
twice a year, is recommended.
Sand and dust on the seat surface may
l
damage the overcoat of the genuine leather
surfaces and accelerate wear.
Greasy soiling on genuine leather may
l
cause molding and stains.
Rubbing hard with a stiff brush or cloth
l
may cause damage.
Do not wipe the leather using alcohol,
l
chlorine bleach, or organic solvents such as
thinner, benzene, or gasoline. Otherwise, it
may cause discoloration or stains.
If the seats get wet, promptly remove
l
moisture with a dry cloth. Remaining
moisture on the surface may cause
deterioration such as hardening and
shrinkage.
Exposure to direct sunlight for long periods
l
may cause deterioration and shrinkage.
When parking the car under direct sunlight
for long periods, shade the interior using
sunshades.
Do not leave vinyl products on the seats for
l
long periods as they may affect the leather
quality and coloring. If the cabin
temperature becomes hot, the vinyl may
deteriorate and adhere to the genuine
leather.
Fabric
Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean it with a mild soap solution good
for upholstery and carpets. Remove fresh
spots immediately with a fabric spot
cleaner.
í
8-64
Some models.
Form No.8CG3-EA-11J
Black plate (456,1)
To keep the fabric looking clean and
fresh, take care of it. Otherwise its color
will be affected, it can be stained easily,
and its fire-resistance may be reduced.
CAUTION
Use only recommended cleaners and
procedures. Others may affect
appearance and fire-resistance.
í
Piano black panel
The following parts are fitted with panels
that have been treated with a special
coating that resists scratching.
Center panel
l
Door switch panel
l
Steering wheel (partial)
l
When the panel needs to be cleaned, use a
soft cloth to wipe off dirt from the surface.
NOTE
Scratches or nicks on the panels resulting from
the use of a hard brush or cloth may not be
repairable.
qCleaning the Lap/Shoulder Belt
Webbing
Clean the webbing with a mild soap
solution recommended for upholstery or
carpets. Follow instructions. Don't bleach
or dye the webbing; this may weaken it.
After cleaning the belts, thoroughly dry
the belt webbing and make sure there is
no remaining moisture before retracting
them.