Mazda CX-7 Maintenance And Care page 46

CX-7_8CG3-EA-11J_Edition1 Page438
Saturday, September 24 2011 10:34 AM
Maintenance and Care
Owner Maintenance
6. Disconnect the bulb from the socket.
7. Install the new bulb in the reverse order
of the removal procedure.
NOTE
To replace the bulb, contact an Authorized
Mazda Dealer.
í
Fog lights
1. Make sure the ignition is switched off
and the headlight switch is off.
2. Loosen the screws securing the unit.
3. Remove the unit by pulling it outward
using both hands.
í
8-46
Some models.
Form No.8CG3-EA-11J
Black plate (438,1)
4. Disconnect the connector from the unit
by pressing the tab on the connector
with your finger and pulling the
connector downward.
5. Loosen the screws securing the fog
light unit.
6. Press the tab on the bulb socket and
disconnect the connector cord.