Reverse Lights - Mazda 3 Maintenance And Care

Mazda3_8CL4-EA-12G_Edition1 Page450
Monday, June 25 2012 9:47 AM
Maintenance and Care
Owner Maintenance
2. Remove the cover.
Left side
Right side
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
8-54
Form No.8CL4-EA-12G
Black plate (450,1)

Reverse lights

(4 Door)
1. Make sure the ignition is switched off
and the headlight switch is off.
2. Pull the center of each plastic retainer
and remove the retainers and the trunk
lid trim.
Installation
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
(5 Door)
1. Make sure the ignition is switched off
and the headlight switch is off.
Removal