Rear Turn Signal Lights - Mazda 3 Maintenance And Care

Mazda3_8CL4-EA-12G_Edition1 Page449
Monday, June 25 2012 9:47 AM
Right side
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of the removal procedure.

Rear turn signal lights

(4 Door)
1. Make sure the ignition is switched off
and the headlight switch is off.
Form No.8CL4-EA-12G
Black plate (449,1)
Owner Maintenance
2. Pull the center of each plastic retainer
and remove the retainers and the trunk
end trim.
Removal
Installation
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
(5 Door)
1. Make sure the ignition is switched off
and the headlight switch is off.
Maintenance and Care
8-53