Marantz SR4600 User Manual page 24

2-3. SPEAKERS LEVEL SETTING WITH TEST TONE
Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level. Moreover, if the T.TONE button is pressed,
unit can enter into this menu directly.
Note:
• The speaker level settings are not available in 7.1
Channel Input mode, CS mode and Multi Channel
Stereo mode.
T(TEST) MODE :
Selects " MANUAL" or "AUTO" for generating
mode of test tone or cursor button.
If you select "AUTO" by pressing the
test tone will be cycled through in a circular pattern
which is L (Left) → C (Center) → R (Right) → SR
(Surround Right) → SBR (Surround Back Right) →
SBL (Surround Back Left) → SL (Surround Left) →
SW (Subwoofer) → L →.. increments of 2 seconds
for each channel.
Using the and cursor buttons, adjust the
volume level of the noise from the speaker so that
it is the same level for all speaker.
Press the ENTER button, you can stop the test
tone mode. Or press the or cursor button to
select "EXIT" then press the ENTER button to exit
the SETUP MENU.
Or press the or cursor button to select
"RETURN" then press the ENTER button to return
the previous "2-2. Speakers Distance" setup.
If you select "MANUAL", adjust the output level of
each speaker as follow.
1. 3. 5. 1. 5.
1. 2. 5.
AV SURROUND RECEIVER SR4600
INPUT SELECTOR
SURROUND
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG
DIGITAL DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ
L
AAC
PCM
SL
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY
7.1CH INPUT S. SPEAKER B
STANDBY ENTER
AUTO HT-EQ MENU EXIT
POWER ON/OFF PHONES
AUX1 AMP
TV MAIN MAIN
2. 5.
VOL. SLEEP MUTE VOL.
OSD MENU
1. 5.
ENTER
1. 3. 5.
SET UP/ MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES VIRTUAL
4 5 6
20
1.
When you select "MANUAL" in T-MODE menu
by pressing the or button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the button. This unit will emit the
pink noise from the center speaker.
2.
Using the and cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted to
any level between – 10 and +10 dB in 1dB
intervals).
button, the
Maximum
+10dB
+9dB
1 dB interval
Reference 0dB
1 dB interval
-9dB
Minimum
-10dB
(SW -15 dB)
3.
Press the cursor button again. This unit will
now emit the pink noise from the front right
speaker.
5. 4.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
5.
Press the ENTER button, you can stop the
test tone mode. Or press the
C R
LFE
S SR
button to select "EXIT" then press the ENTER
button to exit the SETUP MENU.
MEMORY CLEAR
Or press the or button to select "RETURN"
BAND T-MODE
then press the ENTER button to return the
previous "2-2. Speakers Distance" setup.
Notes:
• Speakers that you selected "None" for in the
Speaker Size Setup menu will not appear.
• The setup level for each channel is memorized for
reproduction in all surround mode by this method
exclude CS mode, Multi channel stereo mode and
7.1 ch input mode.
• To adjust the speaker levels for 7.1-channel input
5.
sources, you will need to use the 7.1CH Level
Input setup menu.
MENU STRUCTURE of Speaker Level setup
MENU STRUCTURE of Speakers Level setup
Direct selec Speakers
by remote Distance
control setup
Speaker
Speakers
Level setup
button
TO MAIN MENU
MAIN
MENU
button
2-4. SPEAKERS LEVEL SETTING WITHOUT TEST TONE
Channel level (speaker level) can be adjusted
without using test tone.
Note:
• Four channel level settings can be memorized for
reproduction: the 7.1 ch input mode, CS mode,
Multi channel stereo mode, and all other surround
modes, respectively.
or cursor
1.
Set the surround mode or 7.1 ch input mode
which you want to adjust the channel level.
2.
Press the CH.SEL button on the remote.
3.
Select the desired channel (speaker) with the
or cursor buttons.
4.
Adjust the level with the
5.
After completing the setup, press the CH.SEL
button again.
Test Tone mode
MANU AUTO
(Auto)
SW
L C
Listening
Positiom
SL
SBL SBR
RETURN EXIT
exit SETUP
Speakers
MENU
Distance setup
or cursor buttons.
R
SR