Marantz SR8200 User Manual
Av surround receiver
Hide thumbs
Also See for SR8200:
- Specifications (4 pages) ,
- Service manual (145 pages) ,
- User manual (19 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Marantz SR8200
Summary of Contents for Marantz SR8200
- Page 1 Model SR8200 User Guide AV Surround Receiver...
- Page 2 Kvitto eller faktura är tillräokligt bevis fö detta. NEDERLANDS DANSK GARANTIE Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Marantz. GARANTI UW KWITANTIE, KASSABON E.D. BEWAREN Henvend dem til Deres MARANTZ-forhandler angående inrformation om garantien.
- Page 3 The SR8200 is in conformity with the EMC directive and low-voltage directive. Français Le SR8200 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR8200 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte.
-
Page 4: Table Of Contents
REMOTE-CONTROLLABLE RANGE ............13 BASIC OPERATION (TUNER) ....43 OPERATING AMP & TUNER ..............14 SHOW THE STATUS OF SR8200 ON THE LCD OF RC3200A ....16 LISTENING TO THE TUNER ..............43 WORKING WITH MODES ................17 PRESET MEMORY ..................43 ADJUSTING THE SETTINGS .............. -
Page 5: Foreword
If the mains plug contains a fuse, this should have a value of 13A. If a noise. plug without a fuse is used, the fuse at the distribution board should • Prior to connecting other audio and video equipment to the SR8200, not be greater than 5A. please read their owner’s manuals. -
Page 6: Features
FEATURES FLEXBILITY FEATURES FUTURE-PROOF INTERFACE ARCHITECTURE a versatile RS232 port allows the SR8200’s internal Flash Memory to AMPLIFIER FEATURES be directly computer accessed for installing such future upgrades as new DSP algorithms, new surround formats/parameters, and other • THX Select certified types of processing updates. -
Page 7: Description
Now, every moviegoer can hear the sound exactly as the moviemaker correcting the tonal and spatial errors that occur. intended. When the THX mode of the SR8200 is on, three distinct THX DTS can be enjoyed in the home for either movies or music on of technologies are automatically added: DVD’s, LD’s, and CD’s. - Page 8 Circle Surround is backward compatible, such that surround playback is possible from any stereo or passive matrix-encoded material. Five full-bandwidth, discrete channels of information can be extracted from an enormous library of material not multi-channel encoded. These sources include many of today’s DVDs and laser discs, as well as most all video tape, VCD, Compact Disc, radio and television broadcast material.
-
Page 9: Front Panel
FRONT PANEL AV SURROUND RECEIVER SR8200 SELECTOR VOLUME DOWN DOWN TUNING DISPLAY CLEAR MEMO T-MODE P-SCAN SELECT ENTER MUTE 7.1CH-IN VCR 1 VCR2/DVD-R TAPE CD-R TUNER MULTI-SPK SLEEP S-DIRECT AUX1 AUX1 INPUT STANDBY DIGITAL S-VIDEO VIDEO AUDIO MULTI ROOM NIGHT... -
Page 10: Mute Button
@5 PHONES jack for stereo headphones Press this button to mute the output to the speakers. Press it again to This jack may be used to listen to the SR8200’s output through a pair return to the previous volume level. -
Page 11: Fl Display
¡6 a DISP (Display Off) indicator k ENCODED CHANNEL STATUS This indicator lights when the SR8200 is in the display off condition. indicators These indicators display the channels that are encoded with a digital s PRO LOGIC II mode indicators (MOVIE, input signal. - Page 12 This indicator lights when the seep timer function in main-room is in use. ¡7 NIGHT mode indicator This indicator lights when the SR8200 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.
-
Page 13: Rear Panel
(+) terminals on AM reception in most areas. Position the loop antenna until you hear the SR8200 to the red terminals on the speaker and the black (–) the best terminals on the SR8200 to the black terminals on the speakers. - Page 14 SWITCHED outlet is provided. Note: This is always live as long as the SR8200 is plugged into a live outlet. • An optional remote transmitter kit is required. A component connected here may be left on permanently, or may be switched off with its own power switch.
-
Page 15: Remote Control Unit Rc3200A
C S (Status) button Insert the new batteries (AA type) with correct (+) and (–) polarity. Press this button to see (jump to) the status of SR8200 on LCD panel. D M (Menu) button Use this button to entry the OSD menu system. -
Page 16: Activating The Rc3200A
REMOTE-CONTROLLABLE RANGE The distance between the transmitter of the remote control unit and the IR SENSOR of the SR8200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible. -
Page 17: Operating Amp & Tuner
INPUT SELECT 2 OPERATING AMP & TUNER AMP PAGE 3/8 To control the SR8200 by your RC3200A, you have to select the device AMP or TUNER on HOME screen. MAIN AMP PAGE 1/8 Tape, LD, AUX1, AUX2, VCR2, CD-R These buttons are used for selecting an input source. (see page 34) - Page 18 SURROUND MODE 3 AMP PAGE 7/8 Power On and Off buttons These buttons are used to turn on or off SR8200 AM, LW, FM buttons These buttons are used to switch between FM, AM, and LW mode of the tuner.
-
Page 19: Show The Status Of Sr8200 On The Lcd Of Rc3200A
TUNER PAGE 2/3 SHOW THE STATUS OF SR8200 ON THE LCD OF RC3200A RC3200 has 2way communication with SR8200, it shows some status screen for SR8200. 1/2 Status To show 1 page of status screen, press S button . Frequency Direct button This button is used to select the mode of frequency direct input. -
Page 20: Working With Modes
WORKING WITH MODES ADJUSTING THE SETTINGS RC3200A starts up in Use mode. In this mode you operate your The RC3200A settings can be adjusted in the Setup mode. devices. For customizing the RC3200A (adjusting the settings, Press and hold the Mode button for 3 seconds. learning buttons or recording macros) you have to switch to the The Mode screen appears. - Page 21 SECOND SETUP PAGE Tap the Revert button. A message screen appears to confirm or cancel the revert On the second setup page you can adjust: process. • the date; • the time. Press OK or Cancel. TO EXIT SETUP MODE Adjust the Date Press the Mode button.
-
Page 22: Learning Commands
Press and hold the button on the existing remote control you want LEARNING COMMANDS to learn to the RC3200A. If an IR code or a brand is not in the database, you can program When the RC3200A receives an IR code: RC3200A commands by transmitting IR signals from your existing •... - Page 23 Tap Macro button. Tap Start. Macro screen appears. The HOME screen appears with the 'Recording' label at the top of the screen. The buttons you tap on this screen will not be recorded. From the HOME you can go to the different devices or you can press the Extra hard button to go to the Extra screen with delays and beeps.
-
Page 24: Rc3200 Edit
RC3200edit is the tool for you to use. You can find more information and updates of the software on http:// www.marantz.com. RC3200edit is the visual editor for creating and configuring RC3200A Configuration Files (NCF) on your computer. An NCF is a file that is used to define the RC3200A behaviour and look for the LCD touch screen. -
Page 25: Important Notices
IMPORTANT NOTICES Take care not to scratch the touch screen Use your finger to tap the LCD touch screen or use plastic-tipped pens intended for use with touch screens. Never use an actual pen, pencil or other sharp object on the LCD touch screen. -
Page 26: Connecting
LEFT MULTI VIDEO MONI. ANTENNA FRONT MULTI ROOM RIGHT RIGHT COAX MONITOR SURR. CENTER BACK DIGITAL MODEL NO.SR8200 LEFT INPUT RS232C SURR. SPEAKER SYSTEMS LEFT 6-8 OHMS FRONT EXT. IR SURR. SURR. DC OUT 1 DC OUT 2 RIGHT TAPE VCR1 SURR. -
Page 27: Connecting The Video Components With S-Video / Scart
LEFT LEFT MULTI VIDEO MONI. ANTENNA FRONT MULTI ROOM RIGHT RIGHT COAX MONITOR SURR. CENTER BACK MODEL NO.SR8200 LEFT RS232C SURR. SPEAKER SYSTEMS LEFT 6-8 OHMS FRONT EXT. IR SURR. SURR. DC OUT 1 DC OUT 2 RIGHT TAPE VCR1 SURR. -
Page 28: Connecting The Digital / 7.1Ch Input
7.1CH-IN AUDIO VIDEO S-VIDEO PRE OUT SBL and SBR terminals on the SR8200, and connect the surround back left & right speakers to that power amplifier. PASSIVE • You will also need to make the appropriate SUBWOOFER setting in the OSD Menu: SPEAKER SETUP →... -
Page 29: Connecting The Speakers With External Amplifier
LEFT LEFT MULTI VIDEO MONI. ANTENNA FRONT MULTI ROOM RIGHT RIGHT COAX MONITOR SURR. CENTER BACK MODEL NO.SR8200 LEFT RS232C SURR. SPEAKER SYSTEMS LEFT 6-8 OHMS FRONT EXT. IR SURR. SURR. DC OUT 1 DC OUT 2 RIGHT TAPE VCR1 SURR. -
Page 30: Connecting The Remote Control Bus (Rc-5)
LEFT LEFT MULTI VIDEO MONI. ANTENNA FRONT MULTI ROOM RIGHT RIGHT COAX MONITOR SURR. CENTER BACK MODEL NO.SR8200 LEFT RS232C SURR. SPEAKER SYSTEMS LEFT FRONT 6-8 OHMS EXT. IR SURR. SURR. DC OUT 1 DC OUT 2 RIGHT TAPE VCR1 SURR. -
Page 31: Setup
EXIT and press the OK button. component input of your TV or projector. (see 24 page) • In order to view the SR8200’s displays, the correct video source must be selected on the video display. -
Page 32: Input Setup (Assignable Digital Input)
• If “None” is selected for the Surround L/R setting, then this setting is fixed to “None.” After you have installed the SR8200, connected all the components, • Required for enjoying THX Surround EX audio. and determined the speaker layout, it is now time to... - Page 33 This is important for the timing of the acoustics to create the proper sound space that the SR8200 and today’s sound systems are able to 2 - 3 S P E AK E R S L E V E L produce.
-
Page 34: Preference
Left or Right cursor button. TEST SIGNAL: Press the OK or Left button, START is indicated and If you select “ENABLE”, SR8200 will display the status it begins to generate a Bass test tone from the of the feature (Volume up/down, input select, etc..) on speaker which was designated “bass signal output”... -
Page 35: Surround
Pro Logic II-Music mode creates a rich and enveloping surround 4 S UR ROUND ambience from stereo sources such as CDs. In this mode, SR8200 includes three controls to fine-tune the S URR . MOD E AU T O soundfield as follow. -
Page 36: Multi Room
DC TRIGGER SETUP SR8200 has some feature to MULTI ROOM SYSTEM as source SR8200 has two DC trigger control jacks, each one is selectable to selector, OSD information, sleep timer, Multi Room Speaker output link with input functions for the main room or multi room. -
Page 37: Basic Operation (Play Back)
(Maximum value of channel level)”.) • As the input is changed, the SR8200 will automatically switch to the digital input, surround mode, attenuation, and night mode status that were entered during the configuration process for that source. -
Page 38: Temporarily Turning Off The Sound
Press the MUTE button again to return to normal operation. USING THE SLEEP TIMER To program the SR8200 for automatic standby, press SLEEP buton or tap the Sleep on the remote. Each press of the button will increase the time before shut down in the following sequence. -
Page 39: Surround Mode
LFE channel. input signal and speaker setup. The DTS mode cannot use when an analog input has been selected. When the signal in another digital format is input, output of SR8200 will be muted. AUTO When this mode is selected, the receiver determines whether the DTS-ES (DISCRETE 6.1, MATRIX 6.1) - Page 40 DTS-digital output. You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the SR8200 digitally. This is because the digital signal has been processed (such as the output level, sampling frequency, or frequency response) and the SR8200 cannot recognize the signal as DTS data.
- Page 41 The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode buttons on SR8200 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal. That relationship is as follows;...
- Page 42 Output Channel Front information display Surround Mode Input Signal Signal format L/R C SB SubW Channel status Dot matrix display Segments indicators CS5.1 music Dolby D Surr. EX O O O (2 DIGITAL) L,C,R,SL,SR,S,LFE DOLBY D CS5.1 cinema DTS-ES O O O O O dts , ES L,C,R,SL,SR,S,LFE DTS-ES...
-
Page 43: Other Function
OTHER FUNCTION VIDEO ON/OFF When no video signals of a DVD, etc., are connected to the SR8200 or the DVD, etc., are connected directly to a TV, the unnecessary video TV AUTO ON/OFF FUNCTION circuit can be turned off by selecting the “VIDEO OFF” setting. -
Page 44: Recording An Analog Source
In normal operation, the audio or video source selected for listening When a digital audio recorder is connected to the DIGITAL outputs, through the SR8200 is sent to the record outputs. you are able to record the digital signal using a CD-R, MiniDisc or This means that any program you are watching or listening to may be other digital recording system. -
Page 45: 7.1 Ch Input
7.1 CH INPUT. The SR8200 is equipped for future expansion through the use of Multi channel SACD or DVD-Audio player. This is selected, the input signals connected to the FL(front left), FR(front right), CENTER, SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the 7.1... -
Page 46: Basic Operation (Tuner)
(FM) TUNING MODE (AUTO STEREO OR MONO) VOLUME DOWN DOWN TUNING DISPLAY CLEAR MEMO T-MODE P-SCAN (USING THE SR8200) ENTER MUTE 7.1CH-IN VCR 1 VCR2/DVD-R TAPE CD-R TUNER To select tuner and desired band (FM, LW or AM), press the... - Page 47 MULTI ROOM NIGHT AUX2 1. 3. (Using the SR8200) Press the P-SCAN button. “PRESET SCAN” appears on the display and then the preset station with the lowest preset number is recalled first. Preset stations are recalled in sequence (No.1 → No.2 → etc.) for 5 seconds each.
-
Page 48: Rds Operation
FM signal. SR8200 is equipped with RDS to assist in the selection of FM stations using station and network names, rather than broadcast frequencies. Additional RDS functions include the ability to search for program types. - Page 49 PTY AUTO SEARCH Your receiver is equipped to automatically search for stations transmitting any of 29 different program types. To search for a PTY, follow these steps: DISPLAY CLEAR MEMO DOWN TUNING 7.1CH-IN VCR 1 VCR2/DVD-R TAPE MULTI-SPK SLEEP S-DIRECT AUX1 AUX1 INP DIGITAL...
-
Page 50: Multi Room System
Controlling volume level, sleep timer, and muting. Selecting MULTI SPEAKER TERMINALS input audio and video source The SR8200 allows you to connect another set of speakers and place Tuner: them in a different room or separated area for listening to music. -
Page 51: Troubleshooting
Are you operating the unit properly following user’s guide ? Marantz distributor or the Marantz Service Center in your country. Are the power amplifiers and speaker working properly ? SYMPTOM... - Page 52 Should the operation or display seem to be abnormal, reset the unit with the following procedure. The SR8200 is turned on, press and hold the SELECT and AUX1 buttons simultaneously for 3 seconds or more. Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their...
-
Page 53: Technical Specifications
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ..............................87.5 - 108.0 MHz Usable Sensitivity ............................. IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ............................ Mono/Stereo 75/70 dB Distortion ..............................Mono/Stereo 0.2/0.3 % Stereo Separation ................................ 1 kHz 45 dB Alternate Channel Selectivity ..........................± 300 kHz 60 dB Image Rejection ................................ - Page 54 MILITARY MARKET EUROPE PASCO GmbH PO BOX 1280, Sandhausen 69200, Germany NETHERLANDS Marantz Domestic Sales A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands NEW ZEALAND Wildash Audio Systems 14 Malvern Road, Mt. Albert, Auckland, New Zealand...
Need help?
Do you have a question about the SR8200 and is the answer not in the manual?
Questions and answers
I’ve connected the red/blue rca cable to the AV receiver CD input slots but no sound comes out of my center speaker but do hear sound out of my two floor standing speakers. What do I have to setup in the menu to get sound out of all my speakers including floor standing + center speaker - Marantz SR8200
To get sound from all speakers, including the center speaker, when using the CD input on the Marantz SR8200, follow these steps:
1. Select AMP Mode: Use the remote commander and set it to AMP mode.
2. Access the Setup Menu: Press the *Menu* button on the remote to display the "MAIN SETUP MENU" on the screen.
3. Choose Sound Mode: Navigate using the Up or Down cursor buttons to select a surround mode that supports multi-channel playback, such as Dolby Pro-Logic II (Music) or Neo:6.
4. Adjust Speaker Levels:
- Select "MANUAL" speaker setup.
- Use the Up or Down cursor buttons to adjust the output level of each speaker.
- Use the Left or Right cursor buttons to set the distance for each speaker.
5. Confirm Settings: Move the cursor to "NEXT" and press OK to apply the settings.
This setup ensures that all speakers, including the center speaker, produce sound when playing audio from the CD input.
This answer is automatically generated
Front left speaker not working , how to trouble shoot
To troubleshoot a Marantz SR8200 with a front left speaker not working, follow these steps:
1. Check the Headphones – Ensure that headphones are not connected to the headphone jack. If they are, disconnect them.
2. Verify Speaker Connections – Ensure the front left speaker is properly connected to the receiver.
3. Check the Function Selector – Make sure the correct function is selected.
4. Adjust Volume – Increase the master volume level if it is set too low.
5. Inspect the Input Cable – Verify that the input cables are correctly connected according to the connection diagram.
6. Test with Pink Noise – Use the built-in pink noise test to check if the front left speaker produces sound.
7. Confirm Speaker Operation – Test the speaker with another audio source to confirm it is working.
8. Check for Internal Issues – If the issue persists, internal circuitry may be faulty. Unplug the power cable and contact a Marantz dealer or service center.
This answer is automatically generated