Marantz SR6200 User Manual

Marantz SR6200 User Manual

Av surround receiver
Hide thumbs Also See for SR6200:

Advertisement

R
Model SR6200 User Guide
AV Surround Receiver

Advertisement

Table of Contents
loading

Summary of Contents for Marantz SR6200

  • Page 1 Model SR6200 User Guide AV Surround Receiver...
  • Page 2 Kvitto eller faktura är tillräokligt bevis fö detta. NEDERLANDS DANSK GARANTIE Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Marantz. GARANTI UW KWITANTIE, KASSABON E.D. BEWAREN Henvend dem til Deres MARANTZ-forhandler angående inrformation om garantien.
  • Page 3 The SR6200 is in conformity with the EMC directive and low-voltage directive. Français Le SR6200 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR6200 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte.
  • Page 4 ATT. VOL. ⁄5 ⁄1 ⁄4 PROGRMMABLE REMOTE CONTROLLER R C 6 2 0 0 S R ⁄2 ⁄3 AV SURROUND RECEIVER SR6200 SURROUND VOLUME DOLBY PRO LOGIC TAPE 2 MON STEREO VIDEO SET 1 2 3 4 5 6 DIGITAL...
  • Page 5 DIGITAL FRONT IN / OUT TAPE MONI MONITOR FRONT VCR1 VCR1 TAPE ANTENNA SURR. DIG - 4 IN SR6200 DSS / DSS / SURR. CENTER VCR2 VCR2 / MD / MD CENTER SURROUND DIG - 3 IN VCR1 VCR1...
  • Page 6 FM antenna converter plug (attached) When using the FM antenna attach to this apparatus OUT IN To a component with REMOTE (Marantz RC-5 D-BUS) jacks Refer to "CONNECTION FOR A SUBWOOFER" (Page 6) TAPE DECK...
  • Page 7: Table Of Contents

    TABLE OF CONTENTS FOREWORD ..................................2 PRECAUTIONS ........................................2 INTRODUCTION ................................3 DESCRIPTION ................................. 3 FEATURES ..................................3 FRONT PANEL FEATURES ............................4 REAR PANEL CONNECTIONS ............................5 REMOTE CONTROL OPERATION (RC6200SR) ......................7 OPERATION ..........................................7 FUNCTION AND OPERATION ....................................7 LEARNING METHOD .......................................
  • Page 8: Foreword

    5A. noise. Note: • Prior to connecting other audio and video equipment to the SR6200, The severed plug must be destroyed to avoid a possible shock please read their owner’s manuals. hazard should it be inserted into a 13A socket elsewhere.
  • Page 9: Introduction

    INTRODUCTION FEATURES • Dolby Digital and DTS surround sound decoding, plus Dolby Pro Thank you for purchasing the Marantz SR6200 DTS/Dolby Digital LogicII decoding, Circle Surround and a variety of additional Surround receiver. surround modes. This remarkable component has been engineered to provide you with many years of home theater enjoyment.
  • Page 10: Front Panel Features

    i S. ( Source) DIRECT button FRONT PANEL FEATURES (SEE When this button is pressed, the tone control circuit is bypassed as PAGE iii.) well as Bass Management. Notes: The surround mode is automatically switched to AUTO when the q POWER switch and STANDBY indicator source direct function is turned on.
  • Page 11: Rear Panel Connections

    Connect the TV MONI jack to your TV’s video input (VIDEO IN) jack. This provides power only when the SR6200 is turned on and is useful You can connect your video equipment with S-VIDEO jacks if for components which you use every time you play your system.
  • Page 12 (RC-5) jacks, it allows system remote control to operate. Connect REMOTE CONTROL OUT jack of SR6200 to REMOTE CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by using an RCA pin cable. Note:...
  • Page 13: Remote Control Operation (Rc6200Sr)

    REMOTE CONTROL OPERATION FUNCTION AND OPERATION (RC6200SR) • The remote control unit (RC6200SR) provided with the SR6200 is a “learning”-type, programmable unit capable of controlling almost any component in your system, as well as the Marantz D-BUS components (RC-5). The components to be controlled can be LEARN selected with one slide switch x and nine buttons ¤6 , except AUX...
  • Page 14: Control Buttons

    ⁄9 OSD (on-screen display) button +/A/ANT VIDEO TV/VCR DISC + DSS/VCR DISC + DECK A Press this button to display the current setting status of the SR6200 on the TV screen. DECK B VIDEO TV/VCR DSS/VCR –/B/VCR DISC + DISC –...
  • Page 15: Learning Method

    ON and OFF. Although the learning buttons can be used to operate various components, the indications printed above the buttons are Marantz D- BUS (RC-5) preset code indications. To make it easier to remember which buttons perform which operations, therefore, we recommend...
  • Page 16: Learnable Number Of Buttons

    LEARNABLE NUMBER OF BUTTONS TOTAL SYSTEM KEY NO. VCR1 DSS/VCR2 TUNER TAPE CDR/MD SYSTEM NAME (Can not learn) MAIN POWER ON MAIN POWER OFF (Can not learn) SOURCE POWER SLEEP AUTO CS5.1 6-STEREO LEARN 7-CH RC-5/6 USER LEARN S-DIRECT SOURCE MAIN POWER POWER...
  • Page 17: Operation Of Remote Control Unit

    1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the SR6200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
  • Page 18: Set-Up

    After all components are connected, initial setup must be performed. ON SCREEN DISPLAY (OSD) MENU SYSTEM The SR6200 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller.
  • Page 19: Osd Main Menu

    Stop the LD or CD playback to setup. The SR6200 does not switch from digital input to analog input or vice versa automatically. In the event that both digital and analog inputs are connected to SR6200, if you desire to switch to an analog input temporarily, you can switch by pressing the A/D button u.
  • Page 20: Speakers Setup

    FRONT -L/R : Select the type of front speakers with button. SPEAKERS SETUP CENTER : Select the type of center speaker with button. The home theater system you already have installed should function SURR-L/R : Select the type of surround speakers with button.
  • Page 21: Surround Mode

    SURROUND MODE SOURCE DIRECT : Switch the source direct ON or OFF with button. This bypasses the surround processing and crossover for the main speakers (front left and right will be full range and the subwoofer will be ON) Note: Surround mode cannot be changed in Source Direct mode.
  • Page 22: Basic Operation

    Press F.DIRECT button ¤1 in the TUNER mode on the remote controller. Display shows “ FM– – –.– –MHz” (at FM mode). 1-a. Manual Presetting (Using the SR6200) Refer to the “MANUAL TUNING” or “AUTO TUNING” section Input your desired frequency with tenkeypad buttons on the above to tune in a desired station.
  • Page 23: Rds Operation

    Your receiver is equipped to automatically search for stations indicating the character entry ready status. transmitting any of 29 different programme types. To search for a [Operation (Using the SR6200)] PTY, follow these procedures: buttons !4 is Press the PTY button , in the TUNER MODE on the remote...
  • Page 24: Playback Operation

    Connect your TV TUNER (etc) to the TV IN terminal. Be sure to connect the video input. Turn OFF the power to the TV TUNER and the SR6200 will be in standby mode. Turn ON the TV TUNER and tune in a receivable station.
  • Page 25: On Screen Display Infomation

    So You can select these format function by function. Press OSD button ⁄9 on the remote controller for 3 seconds or STADIUM more. "PAL" or "NTSC" will be shown on the display of SR6200, press OSD button ⁄9 again to change the TV format. DOLBY PL II The indication on FL display will change "...
  • Page 26 5.SLEEP TIMER When the SLEEP button o / c is pressed, the setting on or off and the remaining time of the sleep timer function are displayed. You can change the mode between on, off and the amount of time to elapse before the unit will shut itself off by cycling the SLEEP button o/ c.
  • Page 27: Surround Modes

    SURROUND MODES The SR6200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played.
  • Page 28 The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector knob of the SR6200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal. They are as follows;...
  • Page 29: Trouble Shooting

    Are you operating the unit properly following user’s guide ? Marantz distributor or the Marantz Service Center in your country. Are the power amplifiers and speaker working properly ? SYMPTOM...
  • Page 30 The memory functions are backed up for up to about one week. NOTE: First of all keep SR6200 Standby or Powered-on more than 6 hours, to sufficient time for memory back up.
  • Page 31: Technical Specifications

    TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ..............................87.5 - 108.0 MHz Usable Sensitivity ............................. IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ............................ Mono/Stereo 76/72 dB Distortion ..............................Mono/Stereo 0.2/0.3 % Stereo Separation ................................ 1 kHz 45 dB Alternate Channel Selectivity ..........................± 300 kHz 60 dB Image Rejection ................................
  • Page 32 MILITARY MARKET EUROPE PASCO GmbH PO BOX 1280, Sandhausen 69200, Germany NETHERLANDS Marantz Domestic Sales A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands NEW ZEALAND Wildash Audio Systems 14 Malvern Road, Mt. Albert, Auckland, New Zealand...

Table of Contents