Marantz NR1604 Owner's Manual page 119

Setting items
HDMI Control On : Use HDMI control function.
Off : Do not use HDMI control function.
You can link operations with
devices connected to HDMI
and compatible with HDMI
• When a device that is not compatible with the HDMI control function is
Control.
connected, set "HDMI Control" to "Off".
• Please consult the operating instructions for each connected device to
check the settings.
• Refer to "HDMI control function"
about the HDMI control function.
NOTE
• When "HDMI Control" is set to "On", it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the "HDMI Control" settings have been changed, always reset the
power to connected devices after the change.
Pass Through Source Last : Choose this option to "pass through" the last used HDMI input
The AV receiver will "pass video source.
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER /
through" the sources HDMI
z
signal when in standby. CD : Choose one of these HDMI sources to be passed through when the
AV receiver is in standby.
z "Pass Through Source" can be set when any of the HDMI connectors
is assigned to "CD" for the input source in the "Input Assign"
(vpage 120) setting.
"Pass Through Source" can be set when "HDMI Control" is set to
"On" or "HDMI Pass Through" is set to "On".
Power Off Control All : If power to a connected TV is turned off independently of the input
Links the power standby of source, power to this unit is automatically set to standby.
Video : When the TV is turned off with one of "HDMI", "COMP" or
this unit to external devices.
"VIDEO" (vpage 120, 121) assigned for the CBL/SAT / DVD / Blu-ray /
GAME / AUX1 / AUX2 / MEDIA PLAYER / CD / TV AUDIO input source on
this unit, power to this unit is automatically set to standby.
Off : This unit does not link with power to a TV.
"Power Off Control" can be set when "HDMI Control" is set to "On".
DVD
Setting details
(vpage 95) for more information
116
Output Settings
Makes screen-related settings.
z "CBL/SAT", "DVD", "Blu-ray", "GAME", "AUX1", "AUX2", "MEDIA PLAYER", "CD" or "TV AUDIO"
can be set when "HDMI", "COMP" or "VIDEO" (vpage 120, 121) has been assigned.
"Output Settings" can not be set when 4K signals are input.
Setting items
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Game : Always process video for game content.
Movie : Always process video for movie content.
CBL/SAT z z
DVD
z z
Blu-ray GAME
• If "Video Mode" is set to "Auto", the mode is switched according to the
z z
AUX1 AUX2
input contents.
z
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
MEDIA PLAYER
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
CD z TV AUDIO z
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
Video Conversion On : The input video signal is converted.
The input video signal is Off : The input video signal is not converted.
converted automatically
in conjunction with
• When a non-standard video signal from a game console or some other
the connected TV
source is input, the video conversion function might not operate. In this
(vpage 6 "Converting
case set "Video Conversion" to "Off".
input video signals for HD
• When "Video Conversion" is set to "Off", the video conversion function
output (Video conversion
does not work.
function)").
CBL/SAT z z
DVD
z z
Blu-ray GAME
z z
AUX1 AUX2
z
MEDIA PLAYER
z TV AUDIO z
CD
Video
Default settings are underlined.
Setting details
v See overleaf