Advertisement
Go to the track which you want to
apply the reverb to and assign one
of its aux sends to the reverb bus
where you have inserted the MPX
Plug-In. While looking at the MPX's
input meter, adjust the aux send level
on this first instrument track until the
MPX input meter peaks just below -6.
Go back to the reverb bus level fader
and adjust it until the desired amount
of reverb effect is heard. Now, adjust
the aux send level for each additional
track you would like to apply the
reverb to until the desired amount of
reverb is applied to all tracks.
Source Track
Input Level
Meter
Aux Send
Reverb Bus
Level Fader
MPX Native Reverb
11
9
Advertisement
