Removal steps of speaker assembly
Step
Screw (quantity)
1
M2 × 3 mm, wafer-head, nylon-coated (4)
When installing: Make sure that the speaker connector is attached firmly. Then route the cables and secure
them properly as shown in the illustration above.
1160 Thermal fan assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 68
•
"1030 Memory module slot cover" on page 70
92
Hardware Maintenance Manual
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)