When installing: Make sure that the solid state drive connector or hard disk drive connector is attached
firmly.
1060 Keyboard
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 68
•
"1030 Memory module slot cover" on page 70
Removal steps of keyboard
1. Remove the screws that secure the keyboard.
Step
Screw (quantity)
1
M2 × 14 mm, wafer-head, nylon-coated (2)
2. Press the keyboard in the direction shown by the arrow
detached from the keyboard bezel.
74
Hardware Maintenance Manual
Color
Black
2
until the front edge of the keyboard is
Torque
0.181 Nm
(1.85 kgf-cm)