Installing Or Replacing A Memory Module - Lenovo ThinkStation Hardware Maintenance Manual

Note: Do not touch the contact edge and circuit board of the mSATA solid-state drive.
Figure 11. Installing an mSATA solid-state drive
9. Reinstall any parts or reconnect any cables that you have removed.
10. Reinstall the front fan assembly. See "Replacing the hard disk drive fan assembly" on page 100.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 124.

Installing or replacing a memory module

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important Safety
Information" on page 1.
This section provides instructions on how to install or replace a memory module.
CAUTION:
Turn off the computer and wait three to five minutes to let the computer cool before installing or
replacing a memory module.
.
Chapter 10 Replacing FRUs
89