Vox Operation - Kenwood NEXEDGE NX-200 Instruction Manual

4
5 Press

VOX Operation

1 Connect the headset to the transceiver.
2 Press and hold the key programmed as VOX for
2 seconds.
3 To transmit, simply speak into the microphone.
• The transceiver recognizes sound levels depending on
speaking.
4
5 To turn the VOX function OFF, press and hold the VOX
key again, for 2 seconds.
Note:
level, louder received signals may cause the transceiver to
transmit.
to save the setting.
29