Kenwood ProTalk TK-3201 Instruction Manual page 21

3
4
5
1
Note:
◆ VOX Gain level 1 is the least sensitive and VOX Gain level 10 is
the most sensitive.
◆ If a speaker/ microphone is connected to the transceiver while
the VOX function is switched ON and the VOX Gain level is
configured to a higher, more sensitive level, louder received
signals may cause the transceiver to start transmission.
◆ The transceiver will automatically return to normal operation if no
action is performed for 5 seconds.
Press the Call key to increase the
VOX Gain level and the Monitor key
to decrease the level.
The VOX Gain can be adjusted from
level 1 to level 10 and OF F.
The transceiver announces the VOX
Gain level as you adjust it. If OFF is
selected, the transceiver announces "Off".
Press the PTT switch within 5 seconds
to save the setting, otherwise the
operation will cancel.
A beep will sound and the transceiver
will announce the new VOX Gain level.
Turn the transceiver power OFF and
then ON again to activate VOX.
15