Revert Channel - Kenwood TK-2212 Instruction Manual

R C
EVERT HANNEL
During Scan, pressing the PTT switch to transmit will cause
the transceiver to select the revert channel. Your dealer can
program one of the following six types of Revert channels for
your transceiver:
• Selected: The zone/ channel selected prior to activating Scan is
assigned as the new revert zone and channel.
• Selected + Talkback: The zone/ channel selected prior to
activating Scan is assigned as the new revert zone and channel.
The transceiver also "talks back" on the current receive channel,
allowing you to respond to a call on your current channel before
Scan resumes.
• Priority: If your dealer has programmed a Priority channel, this
channel is the revert zone and channel.
• Priority + Talkback: If your dealer has programmed a Priority
channel, this channel is the revert zone and channel. The
transceiver also "talks back" on the current receive channel,
allowing you to respond to a call on your current channel before
Scan resumes.
• Last Called: The last zone/ channel on which a call was
received is assigned as the new revert zone and channel.
• Last Used: The last zone/ channel on which you responded to a
call is assigned as the new revert zone and channel.
17