Table of Contents
Advertisement
Copying
Note
❒ If you set [Number of Tabs] to [Off], surplus tab stock sheets for each copy are
not ejected.
Reference
"Items of Tray Paper Settings", General Settings Guide
2
When copying onto OHP Transparencies
When copying onto OHP transparencies, select the type and size of paper.
Important
❒ We recommend that you use specified OHP transparencies.
❒ OHP transparencies must be loaded face up in the tray with the notched cor-
ner of the sheet in the appropriate corner of the tray.
❒ To prevent multiple sheets from being fed at once, fan paper before placing it
on the tray.
❒ When copying onto OHP transparencies, remove copied sheets one by one.
A
Select the paper tray where OHP transparencies are set.
B
Place the originals, and then press the {Start} key.
C
When the copy job is finished, press the {Clear Modes} key to clear the settings.
Auto Start
Copying starts immediately when the machine is ready.
A
Make your settings while "
" and "
key.
B
Place the originals.
C
Press the {Start} key.
The machine scans the original.
Copying starts automatically once the machine is ready.
34
Select copy mode, then press the Start
Scanning originals can be started.
" are displayed alternately.
Advertisement
Table of Contents
