Table of Contents
Advertisement
❖ Edit
Item
Front Margin: Left / Right You can specify left and right margins on the front side of copies
Back Margin: Left / Right
Front Margin: Top / Bot-
tom
Back Margin: Top / Bot-
tom
1 Sided→2 Sided Auto
Margin: TtoT
1 Sided→2 Sided Auto
Margin: TtoB
Creep Setting for Maga-
zine
Erase Border Width
Erase Original Shadow in
Combine
Erase Center Width
Front Cover Copy in Com-
bine
Copy Order in Combine
Orientation: Booklet, Mag-
azine
Copy on Designating Page
in Combine
Image Repeat Separation
Line
Double Copies Separation
Line
Separation Line in Com-
bine
Copy Back Cover
Double Copies Position
8
Description
in Margin Adjustment mode.
You can specify left and right margins on the back side of copies
in Margin Adjustment mode.
You can specify top and bottom margins on the front side of cop-
ies in Margin Adjustment mode.
You can specify top and bottom margins on the back side of copies
in Margin Adjustment mode.
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side. The margin is set to the same value of "Back Margin:
Left / Right".
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side. The value set for "Back Margin: Top / Bottom" is
used.
You can specify the creep binding margin width.
You can specify the width for erasing border in the range of "2 to
99 mm" (in units of 1 mm).
In Combine mode, you can specify whether to erase a 3 mm, 0.1"
boundary margin around all four edges of each original.
You can specify the width of the erased center margins with this
function.
You can make a combined copy on the front cover sheet when you
select Front Cover mode.
You can set the copy order in Combine mode.
You can select the orientation of copies to open when using Book-
let or Magazine mode.
You can specify whether to make a combined copy on the inserted
slip sheets in Desig./Chapter mode.
You can select a separation line from: None, Solid, Broken A, Bro-
ken B, or Crop Marks.
You can select a separation line using the Double Copies function
from: None, Solid, Broken A, Broken B, or Crop Marks.
You can select a separation line using the Combine function from:
None, Solid, Broken A, Broken B, or Crop Marks.
When copying the back cover, you can specify whether to have the
back cover outside (outside page) or inside (inside page).
You can select the copy position of bottom or left page according
to top or right page as the original image position.
Advertisement
Table of Contents
