La Crosse Technology WS-7013U Instruction Manual page 10

B.
INDOOR TEMPERATURE
STATION
Note: After the batteries are installed, DO
NOT press any buttons. This may interfere
with the signals, causing temperatures to
register incorrectly.
1.
Remove the battery cover on the
backside. To do this, push up and pull
out.
2.
Observing
the correct
polarity,
install 2
AAA
batteries.
3.
Replace
battery
cover.
4.
Wait 5-6 minutes or until both the
indoor and outdoor temperatures are
shown on the indoor temperature
station.
Battery
Cover
10