Scag Power Equipment STC Operator's Manual page 2

FAILURE TO FOLLOW SAFE OPERATING PRACTICES
* Keep all shields in place, especially the grass discharge chute.
* Before performing any maintenance or service, stop the machine and
remove the spark plug wire and ignition key.
* If a mechanism becomes clogged, stop the engine before cleaning.
* Keep hands, feet and clothing away from power-driven parts.
* Read this manual completely as well as other manuals that came
with your mower.
* Keep others off the tractor (only one person at a time)
* DO NOT operate on steep slopes. To check a slope, attempt to back
up it (with the cutter deck down). If the machine can back up the slope
without the wheels slipping, reduce speed and use extreme caution.
Under no circumstances should the machine be operated on slopes
greater than 15 degrees. ALWAYS FOLLOW OSHA APPROVED
OPERATION.
* DO NOT mow on wet grass. Wet grass reduces traction and steering
control.
REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!
Hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training of the personnel involved in the
operation, transport, maintenance, and storage of the equipment.
STC48V-19KAI with a serial number of C6000001 to C6099999
STC48V-23CV
STC52V-23KA
STC52V-24HN
SMTC-48V
SMWC-52V
Always use the entire serial number listed on the serial number
tag when referring to this product.
WARNING:
MAY RESULT IN SERIOUS INJURY.
This manual covers the operating instructions
and illustrated parts list for:
with a serial number of C6200001 to C6299999
with a serial number of C6300001 to C6399999
with a serial number of C6400001 to C6499999
with a serial number of C7000001 to C7099999
with a serial number of C7100001 to C7199999