Subscribe to Our Youtube Channel
Related Manuals for Sans Digital ELITENAS EN104L+(B)
Summary of Contents for Sans Digital ELITENAS EN104L+(B)
- Page 1 ELITENAS EN104L+ QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE v1.0 v1.0...
-
Page 2: Table Of Contents
TABLE OF CONTENTS End User License Agreement ..............3 Hardware Information ............5 Package Contents ..................5 Hardware Connection Diagram ............5 Hard Drive Installation ................5 Integration and Setup ............6 Default Settings ..................6 Initial Setup ....................6 Console Login .................... -
Page 3: End User License Agreement
United States laws and regulations, including without limitation those of the U.S. Department of for a breach of warranty shall be, at SANS DIGITAL’s option and in its sole discretion, replacement or repair of the Commerce, and, as applicable, the laws and regulations of other jurisdictions. -
Page 4: Hardware Information
Connect the NAS unit to your network (connect the RJ45 network cable to the LAN port 1 as shown in the diagram below), power the unit on and allow it approximately NOTE: Please contact Sans Digital in case of missing or damaged items. two (2) minutes to boot up. -
Page 5: Console Login
CONSOLE LOGIN – Assigning IP to the NAS from the Console To setup the TCP/IP, type ‘3’ and press ‘enter’. If the NAS unit could not be detected via the NAS-Finder Utility, console login could be used for detection by conneting a keyboard and monitor to the NAS unit. Power on the NAS unit and a DOS dialog box will prompt the user to enter a username and a password. -
Page 6: Volume Management
VOLUME MANAGEMENT BEFORE GETTING STARTED By now, the NAS unit should have an assigned static IP by following the previous steps. To manage the NAS unit from the Web GUI, Java Runtime must be installed. Java Runtime allows the managing station (such as a laptop) to communicate with the NAS unit during NAS reboot, and provides the accurate countdown for the NAS unit to auto-reconnect with the Web GUI. - Page 7 Step-5: Select “Storage Manager” - > “Logical Volume Manager” Step-7: Select “User & Access” - > “Access Control – Microsoft” LV is the actual share used via Microsoft Network, AFP or NFS. The name assigned will be Choose a Volume (Network Share). the share name.
-
Page 8: Nas Setup Work-Flow
NAS SETUP WORK-FLOW STEP #1 Execute Enter “2” to Login and move Use Web Browser Assign Static IP Locate the NAS “NAS-Finder.exe” display default to “Network to point to the IP to NIC-0 & Assign IP to locate the NAS NAS info (IP) Setting”... - Page 9 WWW.SANSDIGITAL.COM...
Need help?
Do you have a question about the ELITENAS EN104L+(B) and is the answer not in the manual?
Questions and answers